1. Group Selection — Radial Gauge
When starting the Radial Gauge flow, you select the Gauge group in the first step of the wizard.
Wizard route: /cartography/add/selectgroup
Prerequisite
Enter the Cartography module and start the wizard with Add New Widget.
1. Enter Cartography
Click Cartography in the left menu. Click the Add New Widget button at the top right of the list screen.
2. Review the Group List
The Select Group screen lists 6 group cards.
| Group Card | Status for Radial Gauge |
|---|---|
| Cartesian | Not used for Radial Gauge |
| Circular | Not used for Radial Gauge |
| Gauge | ✅ The group to select for this flow |
| Text | Separate flow for single-value KPI cards (Dynamic Text) |
| DataGrid | Not used for Radial Gauge |
| Other | Not used for Radial Gauge |
3. Select Gauge
Click the Gauge card. The card is highlighted with a bold green border.
Radial Gauge Scenarios
| Scenario | Range |
|---|---|
| OEE score | 0 - 100 % |
| Kiln temperature | 0 - 1200 °C |
| Compressor pressure | 0 - 10 bar |
| Motor speed | 0 - 3000 RPM |
| Tank fill ratio | 0 - 100 % |
4. Confirm and Proceed
Click the Next button at the top right.
Proceeding Without Selecting a Group
If no group is selected, the Next button gives a warning.